Melitta PASSIONE - Page 42

Care and maintenance
90
GB
Symbol on the
selector switch
or buttons
Displays Steps
8. Insert the water tank again.
» The descaling process starts.
» After several minutes, the appli-
ance indicates that:
– the third programme stage is
reached
– the rotary regulator must be
actuated.
9. Turn the rotary regulator clockwise
until it stops.
» The descaling process is continued.
» After several minutes, the appli-
ance indicates that the drip tray
and the coee grounds container
must be emptied.
10. Empty the drip tray and the coee
grounds container.
11. Insert the drip tray without the coee
grounds container.
» The appliance indicates that:
– the fourth programme stage is
reached
– the water tank must be lled.
12. Place the coee grounds container
beneath the Cappuccinatore.
13. Open the lid of the water tank and
pull the water tank upwards out of the
appliance by the handle.
14. Empty and clean the water tank.