14
Construction and description
2.8 Ambient conditions
► The appliance may only be used in enclosed areas and under the following ambient
conditions:
Ambient temperature
16 ºC to 28 ºC
Humidity rh max. 70 %, non-condensing
Overvoltage category II
Pollution degree 2
Altitude of installation max. 2,000 m above sea level
► The appliance may not be used in areas where there is a risk of explosion. The ambi-
ent air must not contain any explosive dusts, gases, vapours or gas-air mixtures. The
appliance is not explosion-proof.
► Heavy dust production or aggressive vapours in the vicinity of the appliance could
lead to sedimentation in the interior and, as a consequence, could result in short
circuits or damage to electrical parts. For this reason, sufficient measures to prevent
large clouds of dust or aggressive vapours from developing should be taken.
2.9 Scope of delivery
► Power cable
► Sliding grid (load capacity 30 kg each)
► The operating instructions at hand
► Calibration certificate
► For certain appliance sizes, separately packaged fastening material for wall mounting
(see page 16)
2.10 Optional accessories
► USB to Ethernet converter (Fig. 6). Makes
it possible to connect the appliance's
network interface (see page 12) to the USB
port of a computer / laptop.
► Reinforced, sliding steel grids with a load
capacity of 60 kg each (for appliance size
110 and larger)
Fig. 6 Converter USB to Ethernet
To Next Page
Loading...
