Memmert IPP 55 - Unit

30
Menu mode
1. Activate the
SETUP display. The entry
IP address is automatically high-
lighted.
SETUP
Balance
Einheit
IP Adresse
+30%
192.168.1 00 .100
Alarm Temp
°C F
TWW TWB
Timer Mode
SETUP
Unit
IP address 192.168.100.100
Subnetmask 255.255.0 .0
Alarm Temp
°C F
190 °
Timer Mode
2. Accept the selection by pressing the
confirmation key. The first three digits
of the IP address are automatically
selected.
Unit
IP address 192.168.100.100
Subnetmask 255.255.0.0
Alarm Temp
°C F
24 °
Timer Mode
3. With the turn control, set the new
number, e.g. 255.
SETUP
Unit
IP address 255.168.100.100
Subnetmask 255.255.0.0
Alarm Temp
°C F
24 °
Timer Mode
4. Accept the selection by pressing the
confirmation key. The next three digits
of the IP address are automatically
selected. Setting these is done with the
turn control according to the descrip-
tion above.
Unit
IP address 255.168.100.100
Subnetmask 255.255.0.0
Alarm Temp
°C F
24 °
Timer Mode
5. After setting the last three digits, ac-
cept the new IP address by pressing the
confirmation key. The selection returns
to the overview.
The subnet mask is set accordingly.
SETUP
Unit
IP address 255.145.136.225
Subnetmask 255.255.0.0
Alarm Temp
°C F
24 °
Timer Mode
7.3.2 Unit
Here, you can choose whether the temperature is displayed in °C or °F.
1. Activate the
SETUP display and select
Unit with the turn control.
SETUP
Unit
IP address 255.145.136.225
Subnetmask 255.255.0.0
Alarm Temp
°C °F
24 °
Timer Mode
2. Accept the selection by pressing the
confirmation key. The adjustment op-
tions are automatically highlighted.
Unit
IP address 255.145.136.225
Subnetmask 255.255.0.0
Alarm Temp
24 °
Timer Mode
°C °F