Memmert IPP 55 - Balance (Only for Model Sizes 260 and 750)

33
Menu mode
7.3.5 Balance (only for model sizes 260 and 750)
Description
For appliances of the sizes 260 and 750, application-specific correction of the heat out-
put distribution (balance) between the upper and lower heating groups is possible. The
adjustment range is from –50 % to +50 %.
SETUP
Balance
Einheit
IP-Adresse
+30%
192.168.100.100
Subnetmask 255.255.0.0
Alarm Temp
°C F
38 °
Timer Mode
SETUP
Balance
Unit
IP address
-20 %
192.168.100.100
Subnetmask 255.255.0.0
Alarm Temp
°C F
38 °
Timer Mode
upper heat output
upper heat output
lower heat output
-20%
lower heat output
+30%
Fig. 20 Heat output distribution (example): The –20 % (left) setting causes the lower heating
groups to emit 20 % less heat than the upper ones. The +30 % (right) setting causes the lower
heating groups to emit 30 % more heat than the upper ones. The 0 % setting restores the
default heat output distribution.
Setting
1. Activate the SETUP display and select
Balance with the turn control.
Balance
Unit
IP address
+30%
192.168.100.100
Subnetmask 255.255.0.0
Alarm Temp
°C F
38 °
Timer Mode
2. Save the selection by pressing the
confirmation key. The current selection
– in this example +30 % – is automati-
cally highlighted.
Balance
Unit
IP address
+30%
192.168.100.100
Subnetmask 255.255.0.0
Alarm Temp
°C F
38 °
Timer Mode