29
Menu mode
You can now
► activate another menu function by
pressing the corresponding activation
key or
► return to operating mode by pressing
the MENU key.
Balance
Einheit
IP Adresse
Alarm Tem
Timer Mod
Unit
IP address
Subnetmas
Alarm Tem
Timer Mode
All other settings can be made accordingly. The settings possible are described in the fol-
lowing sections.
If no new values are entered or confirmed for approx. 30 seconds, the appliance
automatically restores the former values.
7.3 Setup
In the SETUP display, you can set the following parameters:
► the IP address and Subnetmask of the appliance's Ethernet interface (for connec-
tion to a network)
► the Unit of the temperature display (°C or °F, see page 30)
► the trigger temperature of the monitoring function (Alarm Temp, see page 31)
► the Timer mode (see page 32)
7.3.1 IP address
If you want to operate one ore more appliances in a network, each appliance must have
its own unique IP address for identification. By default, each appliance is delivered with
the IP address 192.168.100.100.
LAN 1: 192.168.1.233
192.168.1.216
LAN 2: 192.168.1.215
LAN 3: 192.168.1.241
Editor
Programmname
Simulation Protokoll
-
+
-
+
INP 250 Test 01
180
.0°C
i
HPP 250 Labor
i
37
.0°C
44
.4%rh
151
STAND BY
Programm negnulletsniEllokotorPtäreG efliHnekcurD
AtmoCONTROL
Fig. 18 Operation of several appliances in a network (schematic example)
To Next Page
Loading...
