Memmert WTB - Applied directives and standards; Ambient conditions; Scope of delivery

13 03/2021
Construction and description
2.8 Applied directives and standards
■ Directive 2014/30/EU amended (Directive of the council for harmonisation of the laws
of the member states on electromagnetic compatibility)
Standards complied with: DIN EN 61326-1:2013-07 and EN 61326-1:2013
■ Directive 2014/35/EC amended (Directive of the council on harmonisation of the laws
of
member states relating to electrical equipment designed for use within certain volt-
age limits). Standards complied with:
DIN EN 61010-1:2011-07 EN 61010-1:2010
DIN EN 61010-2-010:2015-05 and EN 61010-2-010:2014
2.8.1 Declaration of conformity
You can download the EC declaration of conformity of the appliance online under:
www.memmert.com/de/downloads/downloads/eu-konformitaetserklaerung
2.9 Ambient conditions
Ambient temperature +5 °C to 40 °C
Air humidity max. 80 % rh (non-condensing)
Overvoltage category II
Pollution degree 2
Altitude of installation max. 2,000 m above sea level
■ The appliance may only be used in enclosed areas and under the ambient conditions
listed below
■ The appliance may not be used in areas where there is a risk of explosion. The ambi-
ent air must not contain any explosive dusts, gases, vapours or gas-air mixtures. The
appliance is not explosion-proof.
■ Heavy dust production or aggressive vapours in the vicinity of the appliance could lead
to sedimentation in the interior and, as a consequence, could result in short circuits or
damage to electrical parts. For this reason, sufcient measures to prevent large clouds
of dust or aggressive vapours from developing should be taken.
2.10 Scope of delivery
Standard
■ Waterbath
■ Network connection
■ Quick guide
Optional
■ Gable/at lid
■ Floor grid
■ Clamps, insert racks and test tube racks
■ Peltier cooling unit
■ Shaking Device
■ Pumping device
■ Factory calibration certicate
■ IQ/OQ document with works test data for appliances