26 03/2021
Maintenance and Servicing
7. Maintenance and Servicing
Danger due to electric shock.
Disconnect the mains plug before any cleaning or maintenance work.
Danger of cuts due to sharp edges.
Always wear gloves when working on the appliance.
7.1 Cleaning
7.1.1 Interior and metal surfaces
Regular cleaning of the easy-to-clean bath prevents build up of material residues that
could impair the appearance and functionality of the stainless steel chamber over time.
The metal surfaces of the water bath can be cleaned with normal stainless steel clean-
ing agents. Make sure that no rusty objects come into contact with the interior or with
the stainless steel housing. Rust deposits can lead to an infection of the stainless steel.
If rust spots should appear on the surface of the interior due to impurities, the affected
area must be immediately cleaned and polished.
7.1.2 Plastic parts
Do not clean plastic parts of the water bath with caustic or solvent-based cleaning
agents.
7.1.3 Glass surfaces
Glass surfaces can be cleaned with a commercially available glass cleaner.
To Next Page
Loading...
