MEMOTRON m2k - Modulation; Delay

Effect Block 2: Modulation / Delay
This effect block provides six different effect algorithms:
1. Chorus
2. Flanger
3. Phaser
4. Tremolo
5. Delay Mono
6. Delay Stereo
The following parameters can be adjusted in the Modulation / Delay effect block:
Parameter Value Range Description
MOD/DELAY OFF / ON deactivates / activates this effect block
Prog Chorus … Delay Stereo selects one of six effect algorithms
Send 0 ... 127 adjusts the effect amount in the output signal
Depending on the effect algorithm, further parameters can be set in this effect block.
Chorus / Flanger:
Parameter Value Range Description
Rate 0 … 127 Modulation rate: 0= ~0,023Hz to 127= ~5,8Hz
Depth 0 … 127 Modulation depth: 0= 0% to 127= 100%
Feedback 0 ... 127 Feedback rate: 0= 0% to 127= 100%
Phaser:
Parameter Value Range Description
Rate 0 … 127 Modulation rate: 0= ~0,023Hz to 127= ~5,8Hz
Feedback 0 … 127 Feedback rate: 0= 0% to 127= 100%
HiDamp 0 ... 127 High frequency damping: 0= 0% to 127= 100%
Tremolo:
Parameter Value Range Description
Rate 0 … 127 Modulation rate: 0= ~1Hz to 127= ~20Hz
Shape 0 … 127 Modulation waveform: 0= Triangle to 127= Square
HiDamp 0 ... 127 High frequency damping: 0= 0% to 127= 100%
Delay Mono / Delay Stereo:
Parameter Value Range Description
Time 0 … 127 Delay time: 0= ~1ms to 127= ~150ms
Feedback 0 … 127 Feedback amount: 0= 0% to 127= 100%
HiDamp 0 ... 127 High frequency damping: 0= 0% to 127= 100%
19 Memotron m2k OS v1.3 User Manual