Mendota FV48 - Contents of the Manual Packet; What Is Not Included with this; Unbolting Fireplace from Pallet

85-03-01194 FV48 Page 53
4.3 CONTENTS OF THE MANUAL PACKET
Once the outer box is removed, you will find the Fireplace body and a manual packet white box. This manual packet white box
includes the items shown in the table, below. Contact Mendota Technical Service if any parts are missing.
Glass Latch Tool #HA-77-00256
Must Leave with Homeowner.
Remote Control Transmitter # 05-02-00408. 3-AAA
Batteries # 65-06-01147.
Must Leave with Homeowner.
Backup Battery Holder #05-02-00345 & QTY 4- AA
Batteries #65-06-01147.
Must Leave with Homeowner.
Backup Power Harness #10-03-00128
Must Leave with Homeowner.
Light Bulb, G9 Xenon, 25w. #10-11-00020
Installation Required.
Light Lens Assembly Packet # HA-88-00167
(Light Lens, Lens Retainer Bracket w/ gasket, four
10-24 Nuts, Lens base gasket).
Installation Required.
Owner’s Manual.
Must Leave with Homeowner.
This Manual
Figure 4-2 Manual Packet Contents
4.4 WHAT IS NOT INCLUDED WITH THIS APPLIANCE?
Log set, firebox lining or decorative front are not included with this base Fireplace product. One of many log set options, firebox
inner liner options and decorative
fronts options must be selected
and purchased separately.
4.5 UNBOLTING
FIREPLACE FROM
PALLET
The Fireplace body is bolted to the
pallet top surface using 5/16” X 1”
Lag Screws in five points around
this unit. Use a 1/2” socket and
wrench to remove the lag screws
and detach fireplace from the
pallet top.
Figure 4-3 Unbolting Unit from Pallet