45 | P a g e
LOCATION OF MASTER SWITCH AND SYNC SWITCH
The Master Switch and Sync Switch are located 9-3/4” to right from the left edge of the glass frame and under the bottom
edge of the glass frame in the bottom air gap.
Use the glass latch tool to actuate the two switches.
The Master Switch must be ON for the pilot flame and burner flames to activate.
The SYNC switch is to be used initially when mating the remote transmitter with the receiver located within this appliance
body. Sync switch use is not necessary during remote transmitter battery replacement. The receiver will continue to re-
main synced to the original transmitter even if battery power is removed from the remote transmitter.
To Next Page
Loading...
