OUTBOARD INSTALLATION
eng 107
2. Insert steering cable into tilt tube.
3725
3. Torque nut to specification.
3727
Description Nm lb‑in. lb‑ft
Nut 47.5 35
Steering Link Rod Fasteners
IMPORTANT: The steering link rod that connects the steering
cable to the engine must be fastened using a special washer
head bolt (P/N 10‑849838) and self‑locking nylon insert locknuts
(P/N 11‑826709113). Never replace locknuts with common nuts
(nonlocking) as they will work loose and vibrate off, freeing the
link rod to disengage.
To Next Page
Loading...
