GENERAL INFORMATION
eng 27
!
WARNING
Improper fasteners or improper installation procedures can
result in loosening or disengagement of the steering link rod.
This can cause a sudden, unexpected loss of boat control,
resulting in serious injury or death due to occupants being
thrown within or out of the boat. Always use required
components and follow instructions and torque procedures.
a - Self‑locking nuts
Lanyard Stop Switch
The purpose of a lanyard stop switch is to turn off the engine
when the operator moves far enough away from the operator's
position (as in accidental ejection from the operator's position) to
activate the switch. Tiller handle outboards and some remote
control units are equipped with a lanyard stop switch. A lanyard
stop switch can be installed as an accessory ‑ generally on the
dashboard or side adjacent to the operator's position.
To Next Page
Loading...
Need help?
General