Spark Plug
Spark plug gap 0.80 mm (0.030 in.)
4. Before installing spark plugs, clean off any dirt on the spark
plug seats. Install plugs finger‑tight, and then tighten 1/4 turn
or torque to specifications.
Description Nm lb‑in. lb‑ft
Spark plug 27 20
Compressor Air Intake Filter
The filter should be changed every 100 hours of operation, or
once a season.
IMPORTANT: Never run the engine without the air filter.
REMOVAL
1. Remove flywheel cover from engine.
2. Snap out the retainer and remove filter.
a - Retainer
b - Filter
To Next Page
Loading...
