Mercury 175 Pro XS OptiMax

MAINTENANCE
82 eng
3. Straighten the bent tabs on the propeller nut retainer.
26900
4. Place a block of wood between gearcase and propeller to
hold propeller and remove propeller nut.
29592
5. Pull propeller straight off shaft. If propeller is seized to the
shaft and cannot be removed, have the propeller removed
by an authorized dealer.
6. Coat the propeller shaft with Quicksilver or Mercury
Precision Lubricants Anti‑Corrosion Grease or 2‑4‑C with
PTFE.
26902
Tube
Ref No.
Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft 92-802867Q 1
95
2-4-C with
PTFE
Propeller shaft 92-802859A 1