EasyManuals Logo

Mercury 200 User Manual

Mercury 200
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
FUEL AND OIL
39
1. Remove the top cowl.
2. Loosen the fill cap on the engine oil reservoir tank. Run the
engine until all the air has been vented out of the oil reservoir
tank and tank is filled with oil to the point of overflow.
3. Re‑tighten the fill cap. Stop the engine and replace the top
cowl.
29307
Filling Fuel Tank
!
WARNING
Avoid serious injury or death from a gasoline fire or explosion.
Use caution when filling fuel tanks. Always stop the engine and
do not smoke or allow open flames or sparks in the area while
filling fuel tanks.
Fill fuel tanks outdoors away from heat, sparks, and open flames.
Remove portable fuel tanks from boat to refill them.
Always stop engine before refilling tanks.
Do not completely fill the fuel tanks. Leave approximately 10% of
the tank volume unfilled. Fuel will expand in volume as its
temperature rises and can leak under pressure if the tank is
completely filled.

Table of Contents

Other manuals for Mercury 200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 200 and is the answer not in the manual?

Mercury 200 Specifications

General IconGeneral
Fuel Induction SystemElectronic Fuel Injection (EFI)
Displacement3.0L (181 cubic inches)
Horsepower200 HP
Alternator Output60-amp
Shaft Length20", 25"
SteeringHydraulic
Weight505 lbs (20" shaft), 515 lbs (25" shaft)
Starting SystemElectric

Related product manuals