Mercury 200 User Manual

FEATURES AND CONTROLS
40
Remote Control Features
Your boat may be equipped with one of the Mercury Precision or
Quicksilver remote controls shown. If not, consult your dealer for
a description of the functions and operations of the remote control.
f
a
c
d
e
b
h
c
a
g
d
e
b
i
f
g
i
c
a
f
26800
a - Control handle ‑ forward, neutral, reverse
b - Neutral release lever
c - Lanyard stop switch ‑ Refer to General Information ‑
Lanyard Stop Switch
d - Trim/tilt switch (if equipped) ‑ Refer to Features and
Controls ‑ Power Trim and Tilt
e - Lanyard ‑ Refer to General Information ‑ Lanyard Stop
Switch
f - Throttle friction adjustment ‑ Console controls require
cover removal for adjustment
g - Ignition key switch ‑ "OFF," "ON," START"
h - Fast idle lever ‑ Refer to Operation ‑ Starting the Engine
i - Throttle only button ‑ Refer to Operation ‑ Starting the
Engine

Mercury 200 Specifications

General

Fuel Induction System	Electronic Fuel Injection (EFI)
Displacement	3.0L (181 cubic inches)
Horsepower	200 HP
Alternator Output	60-amp
Shaft Length	20", 25"
Steering	Hydraulic
Weight	505 lbs (20" shaft), 515 lbs (25" shaft)
Starting System	Electric