Mercury 300 Verado - Engine Operation Procedures

FEATURES AND CONTROLS
47
8. Sync button - Pressing the "SYNC" button turns off or on the auto synchronization feature. Refer
to Synchronizing Engines
N
E
U
T
R
A
L
22945
SYNC
1 LEVER
NEUTRAL
TROLL
THROTTLE
ONLY
DOCK
TRANSFER
+
-
a
b
c
e
g
f
d
a - Neutral LEDS
b - Troll button
c - Transfer button
d - Dock button
e - Throttle only
f - 1 lever button
g - Sync button
9. Control handle tension adjustment screw - This screw can be adjusted to increase or decrease
the tension on the control handle (cover must be removed). This will help prevent unwanted
motion of the handle in rough water. Turn the screw clockwise to increase tension and
counterclockwise to decrease tension. Adjust to tension desired.
10. Detent tension adjustment screw - This screw can be adjusted to increase or decrease the effort
to move control handle out of detent positions (cover must be removed). Turning the screw
clockwise will increase tension. Adjust to tension desired.
a
b
28556
a - Detent tension adjustment screw b - Control handle tension adjustment
screw
SYNCHRONIZING ENGINES
The auto synchronizing feature, when engaged, will automatically adjust all engine speeds to match the
speed of the starboard engine.