EasyManua.ls Logo

Mercury GO BOLDLY SeaPro 500hp

Mercury GO BOLDLY SeaPro 500hp
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Daily Check Inspect Replace
Check that the lanyard stop switch stops the engine. X
Inspect the fuel system for leaks. Refer to Fuel System.
X
Inspect the tightness on transom. Refer to Inspect
Transom Tightness.
X
Check the propellers for damage. X
Inspect hydraulic hoses for leaks. X
200 Hour Maintenance
(200 Hours or Before Long‑Term Storage)
Inspect Replace
Check that the lanyard stop switch stops the engine. X
Inspect the engine starting battery. Refer to Battery
Inspection.
X
Inspect the battery cables and clean power harness.
Refer to Battery Cables and Clean Power Harness.
X
Inspect the fuel system for leaks. Refer to Fuel System.
X
Inspect the tightness on transom. Refer to Inspect
Transom Tightness.
X
Check the propellers for damage. X
Inspect hydraulic hoses for leaks. X
Inspect the corrosion control anodes. Refer to Corrosion
Control Anodes.
X
Change the engine oil and filter. Refer to Changing
Engine Oil and Filter.
X
Change the gearcase lubricant. Refer to Gearcase
Lubricant.
X
Change the transmission fluid. Refer to Transmission
Fluid.
X
Replace the boat‑mounted fuel filter. Refer to Fuel
System.
X
1000 Hour Maintenance Inspect Replace
Check that the lanyard stop switch stops the engine. X
Inspect the fuel system for leaks. Refer to Fuel System.
X
Inspect the tightness on transom. Refer to Inspect
Transom Tightness.
X
Check the propellers for damage. X
Inspect hydraulic hoses for leaks. X
Inspect the corrosion control anodes. Refer to Corrosion
Control Anodes.
X
MAINTENANCE
eng 75

Table of Contents

Related product manuals