1000 Hour Maintenance Inspect Replace
Inspect the cooling system water strainer. Refer to
Cooling System Water Strainer Inspection.
X
Remove the propellers and grease splines. Refer to
Propeller Replacement.
X
Check the power trim fluid level—dealer service. X
Check valve lash—dealer service (SeaPro models only). X
Change the engine oil and filter. Refer to Changing
Engine Oil and Filter.
X
Change the gearcase lubricant. Refer to Gearcase
Lubricant.
X
Change the transmission fluid. Refer to Transmission
Fluid.
X
Replace the transmission filter—dealer service. X
Replace the boat‑mounted fuel filter. Refer to Fuel
System.
X
Replace the accessory drive belt—dealer service. X
Replace the spark plugs—dealer service. X
Replace the spark plug wires—dealer service. X
Replace the water pump impeller—dealer service. X
Replace the power steering fluid and filter—dealer
service.
X
Hood Opening
ELECTRIC HOOD OPENING
IMPORTANT: The hood uses a gas shock to hold it in the fully open position.
The shock also aids hood opening, resulting in a force that may be unexpected
by the operator. Keep your body and all objects clear of the hood while it is
opening.
Press the electric hood latch release button to open the hood.
a - Hood
b - Electric hood latch
release button
MAINTENANCE
76 eng
To Next Page
Loading...
