Mercury GO BOLDLY SeaPro 500hp

3. Slide the hood release lock bar to the left to lock the hood onto the hood
bracket.
a - Install hood on bracket
b - Hood release tab flush with bracket
c - Slide left
4. Close the hood.
Top Cowl Removal and Installation
TOP COWL REMOVAL
1.
Remove the hood to access the lift point. Refer to Hood Removal,
preceding.
2. Disconnect the battery cables from the battery.
3. Disconnect the electrical latch connector from the hood latch.
a - Top cowl
b - Electrical latch connector
a
b
c
71954
71878
a
b
MAINTENANCE
eng 79