Mercury GO BOLDLY SeaPro 500hp

3. Install the manual override access plug into the hood opening.
a - Manual override
access plug
Hood Removal
1.
Open the hood. Refer to Hood Opening.
2. Slide the hood release lock bar to the right to unlock.
3. Push the hood back and lift upward off of the hood bracket.
a - Slide right
b - Push out
c - Lift off
Hood Installation
1. Lower the hood onto the hood bracket.
2. Pull the hood forward until the hood release tab is flush with the hood
bracket.
71962
a
a
b
c
71952
MAINTENANCE
78 eng