2. Thread a water hose into the flush quick connector (5/8 in. garden hose
recommended).
a - Water hose
b - Flush quick connector
c - To water tap
3. Locate the engine flush port on the boat transom and insert the flush
quick connector.
a - Flush quick connector
b - Engine flush port on transom
4. Turn on the water tap and let the water flush through the cooling system
for about 15 minutes.
5. When flushing is complete, turn off the water and disconnect the water
hose.
FLUSHING WITH AN AUTOMATIC OUTBOARD FLUSHING SYSTEM
1. With the engines turned off, place the outboards in a convenient position.
MAINTENANCE
eng 85
To Next Page
Loading...
