Mercury V6 200 User Manual

The fuel injectors are not common to any other engine. Each fuel rail contains three fuel injectors on V6 models, or four fuel
injectors on V8 models.
a - Fuel rail
b - Fuel injector
In‑line Fuel Filter
The in‑line fuel filter is located inside the inlet end of each fuel rail. This in‑line fuel filter consists of a one‑way, reusable filter
element. In the event of fuel contamination, the filter element can be cleaned by backflushing the element with a locally
available fuel system cleaner. Replacement is not required unless the in‑line fuel filter is damaged, punctured, or otherwise
unsuitable for use.
55858
In-line fuel filter
a
b
a
66273
Fuel System
90-8M0146617 eng JULY 2018 © 2018 Mercury Marine Page 7A-3

Mercury V6 200 Specifications

General

Engine Type	V6
Horsepower	200 hp
Fuel Induction System	Electronic Fuel Injection (EFI)
Steering	Big Tiller; Dual cable mechanical; Electro-hydraulic power steering; Hydraulic power steering
Gear Ratio	1.85:1
Shaft Length	20"; 25"
Starting	Electric
Alternator Output	60 amps
Weight	505 lbs (20")