EasyManua.ls Logo

Mercury V8 300

Mercury V8 300
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Restricted oil pickup
Mechanical problem in lubrication system
Summary of Fault Correction Possibilities
Fill the engine with oil.
Correct the wiring problem.
Replace the sensor.
Inspect the oil pump pickup screen.
Check the mechanical oil pressure.
Check the bearing clearances, oil pump, and oil pump relief valve.
Guardian_Oil_Temp_Derate
Fault Type:
Horn: Guardian: UFC: Transmission to Helm: Freeze Frame Priority:
Nonsticky Caution Variable 2021‑23 Yes 4
Explanation
Engine Guardian is active due to excessively high or low oil temp. Power will be limited to prevent engine damage.
Possible Causes
Low engine oil
High engine coolant temperature
Sensor wiring problem
Defective sensor
Summary of Fault Correction Possibilities
Fill the engine with oil.
Repair the cooling system.
Correct the wiring problem.
Replace the sensor.
Guardian_Overheat
Fault Type:
Horn: Guardian: UFC: Transmission to Helm: Freeze Frame Priority:
Nonsticky Caution Variable 2081‑23 Yes 4
Explanation
Engine Guardian is active due to engine overtemperature. Power will be limited to prevent engine damage.
Possible Causes
Restricted water flow
Restricted thermostat
Blockage in cooling system
Damaged water pump impeller
Summary of Fault Correction Possibilities
Flush the cooling system.
Inspect the thermostat.
Inspect the cooling system.
Inspect the water pump impeller.
Fault Codes
90-8M0146617 eng JULY 2018 © 2018 Mercury Marine Page 4A-21

Table of Contents

Related product manuals