HORUS BASE UNIT
IOC-HORUS Specifications
Case Material Powder Coated Steel
Front Panel Material Brushed Aluminum
Weight (excluding redundant PS) 6.5 kg/ 14.4 lbs
Dimensions (2U rack mounting) 483 x 320 x 89 mm
Voltage (AC) 90V–260V, 47–63 Hz
Power Consumption (Max) < 60 Watts
Front Panel TFT size/resolution 4.3” / 480 x 272 pixels
Headphone Monitor Jacks
Headphone Jack 1&2 6.3 mm(1/4”)/3.5mm
Max output Level (Unbalanced) Load = 300 Ohms +15 dBu
Output Impedance 75 Ω
Dynamic Range (A-weighted, typ.) 109 dB
THD+N (1 kHz) @ -2 dBFS < -100 dB (0.001 %)
Gain Range (software controlled) -60 dB to +12 dB
Gain Step/Precision 1dB / ±0.05 dB
SYNC Connectors
“Sync” Cable (LTC/Video Ref/MIDI) D-Sub 15Pin
LTC In & Out (via “Sync” Cable) Balanced XLR
Video Reference In (via “Sync” Cable) BNC
MIDI (I/O via “Sync” Cable) 5-Pin DIN
Word Clock Input (Switchable 75 Ω Termination) BNC, 0.5Vp-p min
Word Clock Output (Zout = 35 Ω) BNC, 5Vp-p
Maximum supported deviation +/-1000ppm
RAVENNA module
RAVENNA Primary / Secondary (GbE) RJ45
AES-EBU module
AES type/pinout DB-25 / AES59 (Tascam Dig.)
AES i/o Grounded and transformer coupled
Output Impedance 110 Ω
MADI module
MADI types (Coaxial / Optical) BNC / SC
Output Impedance 75 Ω
Software Specifications
RAVENNA MassCore Driver Pyramix 8.0 or Higher / Win7 32bit
Windows Driver/OS ASIO 2.2 / Win7 32 or 64bit
Mac Driver/OS CoreAudio / MacOS 10.8.5 or higher (Intel)
To Next Page
Loading...
