Setup Menu
The Setup menu’s primary page contains function buttons described below as well as sub-menu links
listed in the sub-sections; Formats, Routing, Modules, Presets, System, Network and Info
Shutdown: Initiates a proper shutdown of the Horus unit, including a save of the current
configuration. Do not attempt to shutdown the Horus unit in other ways (such
as using the power switch on the back of the device).
Reboot: Power cycles the Horus unit (shutdown>Boot up)
Reboot maintenance Power cycles the Horus unit (shutdown>Boot up) and restarts in Maintenance
mode (required mode for Firmware upgrade)
Reboot to Factory: If selected we will reboot the Horus to the default factory configuration. The
Current configuration will be lost but all the saved presets will be kept and can
be reloaded.
To Next Page
Loading...
