Meters dB scaling The Meters scaling is displaying from -90 dBFS to 0 dBFS.
Meters color range Refer to the Meters Page Settings, in order to adjust the Level meter color
range (Peak, Alignment and Decay time).
Rst Stands for Reset Peaks Hold Meters. The top Red led of the PreAmp metering
will indicate that a Peak has occurred. In order to clear the Peak display, simply
press the RST button. This is useful if you have enabled the Peak Hold option
under the Meters menu Settings
Navigation Use the left << and right >> arrows in order to navigate through the banks of 8
inputs. Will be active if more than one AD8(P) module is present in the unit.
To Next Page
Loading...
