Modules: D/A Sub-Menu
Output attenuation: Calibration of the D/A output (Range -60.0 dB to 0 dB).
Refer to the Hardware section for the D/A onboard output level calibration.
Roll Off Filter: Roll Off Filter: Sharp roll-off filter: Offers a flat frequency response up to
22kHz, within 0.2dB, which has the tradeoff of 36 samples latency. This mode
was and still is the default one.
Slow roll-off filter: Offers a low latency of 9 samples, with the tradeoff of
a gentle frequency response attenuation starting around 16kHz and
reaching -2.5dB at 22kHz
Serial Number: Module serial numbers
Type: Module Type description
Output Source: Visual indication of the current Output Source, selecting the source will bring
you to the Routing Page configuration
Modules: Loopback (hidden menu, available only for debug use)
To Next Page
Loading...
