Merrychef 402s Service & Parts Manual

41
402s Ovens Part. N
o.
32Z3539 Issue 5
APPENDIX 2: MenuKey, changing oven menus
1
1
2
3
Lift the MenuKey cover in the
top front panel of the oven and
put the key in the slot.
The MenuKey System automatically changes all the cooking programs
on the oven from a pre-programmed electronic key.
To change the menus on the oven:
Ensure the power switch is OFF.
With the key still in place switch
the power switch ON.
The oven will now go through the
program download sequence by
displaying the following:
MENUKEY2
The MenuKey Code. e.g. 555
The MenuKey CS e.g.
0A06
MenuKey CS (checksum)
confi rms the menus on this key
are valid for the MenuKey Code.
Confi rm that the MenuKey Code
and MenuKey CS are correct
and press Download Function
key to load the programs into the
Oven memory.
MENUKEY2 DETECTED
Download Upload
MK CODE 555
MK CS 0A06
Download
4
MENUKEY2 DETECTED
Download Upload
MK CODE 555
MK CS 0A06
WARNING
Exit Continue
ALL OVEN PROGRAMS
WILL BE OVERWRITTEN
Note: Downloading from a
MenuKey will clear all the
existing programs
Continue
Check that the key is correct
then press the Continue
function key to proceed with the
Download
MENUKEY2 DOWNLOAD
COMPLETE
Exit
CHECKSUM:0A06
Exit
On completion of the download
press the Exit function key to
return the oven to standby mode.
Remove the MenuKey and keep
in a safe place.
OVEN COLD
PRESS PREHEAT
.
Model No. 402S
Software
MK serial No.
The display briefl y will show the
following:
Oven Model No. Software
& MenuKey serial No.
The standby screen will then
display
Do not remove the key
during download sequence
as this could corrupt
the data on the key
MENUKEY2
DOWNLOADING
MENUKEY2
VERYIFYING

Merrychef 402s Specifications

General

Brand	Merrychef
Model	402s
Category	Microwave Oven
Language	English