45
402s Ovens Part. N
o.
32Z3539 Issue 5
APPENDIX 3: Cleaning procedure 2
18
For the oven to operate at peak effi ciency, the cavity, door and air fi lters and grease fi lter must
be kept clean.
A daily cleaning routine will ensure that you comply with the required hygiene standards and will help
to maintain and prolong the effi ciency of your oven.
Follow the SAFETY INSTRUCTIONS at the beginning of this manual.
Faults arising from neglect or
misuse including use without clean
fi lters in place are not covered
by the guarantee. Service visits
as a result of such faults will be
chargeable.
Hot surface
Hazard
WARNING: DO NOT use caustic cleaners on any part of the oven or oven
cavity as it will cause permanent damage to the Catalytic Convertors
DO NOT use the oven without clean air fi lters and cavity grease fi lter in place
1.
With the oven clean and
cold, spray Merrychef
Oven Protector onto the
sponge
START UP: OVEN COATING PROCEDURE ( clean, cold oven )
4.
Switch the oven ON
when the oven has
reached operating
temperature it will take
30 minutes to cure the
Oven Protector.
3.
Spread Oven Protector
lightly onto the internal
surface of the oven door
2.
Spread Oven Protector
lightly onto all internal
surfaces of the oven
Note: oven protector turns light brown when cured
• ALWAYS switch off at the electrical supply before
cleaning
• Complete COOL DOWN procedure and allow the
oven and accessories to cool before commencing
cleaning
• As required wipe out spillages with disposable
paper wipes
• NEVER use steel wool, knives or harsh abrasives
on any part of the oven
As with all electrical appliances, it is wise to have the
electrical connections inspected periodically.
To Next Page
Loading...
Need help?
General
