EasyManuals Logo

Merrychef 402s Service & Parts Manual

Merrychef 402s
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
53
402s Ovens Part. N
o.
32Z3539 Issue 5
After I minute the Oven will boot-up immediately press the
PAUSE pad to hold the oven information screen.
OVEN INFORMATION
Oven On Time: 00028 Hours
Magnetron On Time: 00000 Hours
Door Operations: 00049
Software Version: 4.0LD
MenuKey Code: 002
MenuKey Checksum F076 PAUSE>>
PAUSE pad
Switch the oven ON to activate the CodeKey, the screen
will remain blank for approximately 1 minute before the
startup screen displays.
Warning:
During the next step the display will be blank for approximately 1 minute.
DO NOT REMOVE THE CODEKEY/ DO NOT TURN THE OVEN OFF
this will damage the logic board.
4.2
Lift cover to insert CodeKey into
Menukey receptacle.
Oven power switch
4.0 CODEKEY Firmware upgrade
Before commencing an oven Firmware upgrade ensure the oven is switched off
4.1 Insert the appropriate CODEKEY (see Matrix 01 on page 2) into the Menukey receptacle on the
control panel.
Procedure:

Other manuals for Merrychef 402s

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Merrychef 402s and is the answer not in the manual?

Merrychef 402s Specifications

General IconGeneral
BrandMerrychef
Model402s
CategoryMicrowave Oven
LanguageEnglish

Related product manuals