Unpacking the Access Point
Installing the AP100 7
Unpacking the Access Point
The AP100 shipping package contains the following items:
z Access point
z CD-ROM of Meru Wireless LAN System documentation
Confirm that the AP100-P shipping package contains the following items:
z Access point
z One mounting bracket
z Light-pipe extender
z Two small mounting screws
z CD-ROM of Meru Wireless LAN System documentation
Installation Requirements
The following recommended mounting locations provide the best reception for the AP:
z On a horizontal surface, such as a table or a desk
z On a vertical surface, usually a wall
z Underneath a horizontal surface, usually a ceiling
z Above a ceiling tile (this installation is supported only for the AP100-P)
Suitable for use in environmental air space in accordance with the Section 300-22(c) of the
National Electric Code and Sections 2- 128.12 - 010 (3) and 12 - 100 of the Canadian Electrical
Code. Part 1. C22. 1. (For AP100-P model only.)
To complete this installation, you need the items listed in Table 1.
To Next Page
Loading...