EasyManua.ls Logo

Metacon-Next FirePro V4 - Meaning of Warning Signals

Metacon-Next FirePro V4
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
WARNING
The controller can only be managed by people who have read the user manual and are thus
sufficiently familiar with the functioning, operation, maintenance, etc. of the controller, as
described in this user manual.
DANGER
It is forbidden to remove, bypass or deactivate safety features and protective devices.
CAUTION
Make sure that all safety features are correctly activated again after all maintenance activities and
other interventions.
ENVIRONMENT
Comply with local legal requirements for all products that are used in the controller and for all
products used to maintain and clean the controller.
4.4
Meaning of warning signals
Table 4 Warning signals control panel
No.
Warning signal
Symbol
Meaning
1 Green LED
LED on: Mains power present
LED flashing: Maintenance cycle reached
1 Red LED
LED on: Error message active
2 Red LED
LED on: Emergency active
3 Red LED
LED on: Battery error
4 Mute button
Switch off buzzer
5 Signal transmitter
See Parameter 5.5

Table of Contents