11
H 1 button Using this button, the infrared heat of the back and neck cushion can be set to
four levels immediately after the system is ready for operation and in any
program:
Push 1 time level 1– low heating power H1 LEDs flash slowly
Push 2 times level 2 – medium heating power H1 LEDs flash quickly
Push 3 times level 3 – maximum heating power H1 LEDs are permanently lit
Push 4 times infrared program is activated H1 LED double flashing interval
H2 button Using this button, the infrared heat of the calf cushion can be set to four levels
immediately after the system is ready for operation and in any program:
Push 1 time level 1– low heating power H1 LED flashes slowly
Push 2 times level 2 – medium heating power H1 LED flashes quickly
Push 3 times level 3 – maximum heating power H1 LEDs are permanently lit
Push 4 times infrared program is activated H1 LED double flashing interval
Infrared program:
In the infrared program, the infrared runs repeatedly through a wave from level 1
to level 3 during the previously set Timer time. In this way, an optimum infrared
application in the different intensities is achieved.
When the time set in the Timer has elapsed, the heating elements are switched off in any mode –
program or standby.
Body zones
Neck
Shoulder/arm
Back
Bottom/hands
Calves/legs
To Next Page
Loading...