AquaLab TDL 11 COMPUTER INTERFACE
11 Computer Interface
Your AquaLab may connect to your computer using USB or RS232.
Your AquaLab was shipped to you with a standard USB cable. Using
this cable, you can send water activity data to a computer for further
analysis and storage. The interface is run through the AquaLink 4
Software or a terminal communication program.
Note: You must install the USB driver before connecting the USB
Cable to your computer. You can install from the USB included with
your AquaLab or download here: www.aqualab.com/aqualink.
11.1 AquaLink 4 Software
AquaLink 4 is available for use with your AquaLab. AquaLink 4 is a
Windows based program designed for data collection and customized
report generation for all AquaLab models. AquaLink 4 logs water
activity, temperature, time of measurement, and date stamps along
with other information. AquaLink 4 also has sample identification
and comment fields that you can use to help annotate the data your
AquaLab is gathering.
A USB of this program was included with your instrument. Fig-
ure 4 shows a screen shot of the AquaLink 4 program.
55
To Next Page
Loading...
