Do you have a question about the METER TEROS 54 and is the answer not in the manual?
Measurement Type | Soil Moisture, Temperature, Electrical Conductivity |
---|---|
Accuracy (Temperature) | ±1°C |
IP Rating | IP68 |
Dielectric Permittivity Range | 1 (air) to 80 (water) |
Measurement Range (Moisture) | 0% to 100% VWC |
Measurement Range (Temperature) | -40 to 60°C |
Measurement Range (Electrical Conductivity) | 0 to 23 dS/m |
Accuracy (Moisture) | ±3% VWC (typical in mineral soils) |
Resolution | 0.1 °C |
Output | SDI-12, RS-485 |
Operating Temperature | -40 to 60°C |
Weight | Approx. 200 g (without cable) |
Cable Length | 5 m standard |
Material | Epoxy |
Electrical Conductivity Range | 0 to 23 dS/m |
Overview of the TEROS 54 installation procedure and necessary tools.
Recommended installation methods for different soil conditions using auger and slide hammer.
Instructions for connecting the TEROS 54 to METER and non-METER data loggers.
Details on communication protocols used by the TEROS 54 probe.
Procedure and tools for safely removing the TEROS 54 from the soil.
Detailed measurement, dielectric, and temperature specifications for the TEROS 54.
Explanation of the theory behind volumetric water content and temperature measurement.
Theory on how the TEROS 54 measures volumetric water content using electromagnetic fields.
Theory on how the TEROS 54 measures soil temperature using integrated sensors.
Description of the TEROS 54 probe and protective cap components.
Information on factory and customer calibration for the TEROS 54 sensor.
Calibration equation for mineral soils and factors affecting accuracy.
Equation for apparent dielectric permittivity and its use in VWC and EC calculations.
Guidelines for TEROS 54 maintenance, lifespan, and cleaning.
Common problems, solutions, and troubleshooting steps for the TEROS 54.
Contact information and procedures for customer support in North America and Europe.
Agreement to METER Group's Terms and Conditions when using the product.