Hint
Tap on or use key to set status.
Rules for automatic applying of statuses
The parent items will automatically
get a status on base of statuses in
child items
• The fail status has highest priority. A fail
status for any item will result in a fail status
in all parent items and an overall fail result.
• If there is no fail status in child items the
parent item will get a status only if all child
items have a status.
• Pass status has priority over checked status.
The child items will automatically
get a status on base of status in the
parent item
All child items will get the same status as applied
to the parent item
Note
• Inspections and even inspection items inside one inspection can have different
• Only inspections with an overall status can be saved.
6.3.3 Single test (Inspection) result screen
Add comment to the inspection
A new inspection was started from a
Structure object in the structure tree
The inspection will be saved under the
selected Structure object.
A new inspection was started from the
Single test main menu
Saving under the last selected Structure
object will be offered by default. The user
To Next Page
Loading...
Need help?
General
