Mark on your equipment certifies that it meets requirements of all
subjected EU regulations.
Mark on your equipment certifies that it meets requirements of all
subjected UK regulations.
This equipment should be recycled as electronic waste.
Instrument has double insulation.
1.2
The instrument is manufactured and tested according to the following regulations, listed
below.
Electromagnetic compatibility (EMC)
Electrical equipment for measurement, control and laboratory use -
EMC requirements Part 1: General requirements
Safety requirements for electrical equipment for measurement, control,
and laboratory use Part 1: General requirements
Safety requirements for electrical equipment for measurement, control
and laboratory use Part 2-030: Particular requirements for testing and
measuring circuits
Safety requirements for electrical equipment for measurement, control
and laboratory use Part 031: Safety requirements for hand-held probe
assemblies for electrical measurement and test
Electrical safety in low voltage distribution systems up to 1000 V a.c. and
1500 V d.c. Equipment for testing, measuring or monitoring of
protective measures
Instrument complies with all relevant parts of EN 61557 standards.
Photovoltaic (PV) systems. Requirements for testing, documentation
and maintenance Part 1: Grid connected systems Documentation,
commissioning tests and inspection
Photovoltaic (PV) systems. Requirements for testing, documentation
and maintenance Part 2: Grid connected systems Maintenance of PV
systems
To Next Page
Loading...
Need help?
General
