METREL MI 3250 User Manual

MI 3250 MicroOhm 10A Safety and operational considerations
10
2.3 Standards applied
The MicroOhm 10A instrument is manufactured and tested in accordance with the
following regulations:
Electromagnetic compatibility (EMC)
EN 61326
Electrical equipment for measurement, control and laboratory
use – EMC requirements
Class A
Safety (LVD)
EN 61010-1
Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1: General requirements
EN 61010-031
Safety requirements for hand-held probe assemblies for
electrical measurement and test
Note:
Immunity to radiated RF fields (Field strength: 10V/m, Modulation: AM, 80%, 1 kHz)
Current
Range
Operational
conditions
Disturbance > 0,25 %
Disturbance < 0,25 %
1mA
Range 2kΩ
100 MHz ÷ 500 MHz
500 MHz ÷ 1 GHz
Note about EN and IEC standards:
 Text of this manual contains references to European standards. All standards of
EN 6XXXX (e.g. EN 61010) series are equivalent to IEC standards with the same
number (e.g. IEC 61010) and differ only in amended parts required by European
harmonization procedure.

METREL MI 3250 Specifications

General

Brand	METREL
Model	MI 3250
Category	Measuring Instruments
Language	English