Metrix IX 3131 - 4. Specifications; 4.1. General Specifications

II - 18 IX 3131
4. SPECIFICATIONS
4.1. General specifications
Measured parameters
L / C / R / D / Q
Circuit mode
Parallel mode : Capacitance and resistance (default)
Series mode : Inductance (default)
Displays
L / C / R : Max display 9999 except 10 mF (120 Hz), 1 mF (1KHz)
D / Q : Max display 999
Measurement terminals : 4
Protection voltage : 5 V with respect to earth
Ranging mode : auto and manual
Test frequency : 1 kHz and 120 Hz
Freq. accuracy : ± 0.01 % (Measurement rate : 1 sec / 1 component)
Test signal level : 0.9 Vrms approx.
Response time : approx. 1 sec / device under test (in manual range)
for all changes higher than 1% of full sale
Temperature coefficient : 0.15 x (specified accuracy) / ° C
(0° C -18° C or 28° C - 40° C)
Operation temperature : 0° C to 40° C ; 70 % R. H. max
Storage temperature : -20° C to 50° C ; 80 % R. H. max
Power supply : AC 100 / 120 / 220 / 240 V ; 50 Hz / 60 Hz
Consumption : 6 W max.
Protective fuse : 70 mA / 250 V (input protective)
0,2 A / 250 V (line voltage 100 / 120 V protective)
0,1 A / 250 V (line voltage 220 / 240 V protective)
Dimensions : 261 mm x 211 mm x 71 mm
Weight : 1,6 kg
Accessories
2 test alligator clips
1 power cord