METRON QA-45 User Manual

Select the desired rhythm by pressing UP (F2) or DOWN (F3).
Save this under ‘Wave” in the STATUS field by pressing Se-
lect. Press CANCEL (F5) to cancel selection. The ECG signal
is output through the low-level ECG connectors, high-level
ECG connector, and paddle contact plates on the QA-45.
4. Set the defibrillator to analyze the ECG rhythm and operate in
the automatic and semi-automatic mode.
5. Records the defibrillator’s response.
8

METRON QA-45 Specifications

General

Brand	METRON
Model	QA-45
Category	Measuring Instruments
Language	English