Slurry Pump
WH06AAAAAA0EN_02B.DOC JAN 04-W07
Description
2/4
2.1.2 Warning and caution signs
This sign, attached to the drive cover, indicates the
direction of rotation of the pump when viewed from the
drive end.
THERE IS RISK OF SERIOUS DAMAGE TO THE PUMP IF IT IS
ALLOWED TO ROTATE IN THE WRONG DIRECTION
.
This sign is a hazard warning and is usually
accompanied by text indicating the nature of the hazard.
THERE IS RISK OF SERIOUS INJURY IF THESE WARNING
INSTRUCTIONS ARE NOT OBSERVED
.
The V-belt guard must always
be mounted during operation
WARNING
The sign is mounted on the V-belt guard.
The guard should always be
fitted when the pump is in
operation.
If the guard is to be removed,
check that the motor is
disconnected from the mains
or that the main switch is
turned off and locked so that
the motor cannot be started
inadvertently.
The guard must always be
refitted before the pump is
started.
This sign is attached to a direct-drive coupling guard.
Direction of rotation of the pump is indicated by this sign
attached to the front of the case.
This sign, attached to the frame, indicates that the pump
requires periodic greasing.
To Next Page
Loading...
Need help?
General
