Metso MM200 EHC-D User Manual

Slurry Pump
100mfg_en.doc Edition5 JAN 04-W24
Description
1/1
2.8 Certificates and test results
DECLARATION BY THE MANUFACTURER
PROHIBITION TO PUT INTO SERVICE
We Metso Minerals (Sala) AB, Norrängsgatan 2, 733 25 SALA, SWEDEN
declare that the slurry pump
Manufacturer Metso Minerals (Sala) AB
Pump type MM200 EHC-D
Pump number 25411801001, 25411801002
Year of manufacturing 2005
- is intended to be incorporated into machinery or to be assembled with
other machinery to constitute machinery covered by Directive 98/37/EG,
as amended;
- does therefore not in every respect comply with the provisions of this
directive;
and that following harmonized standards have been applied
- EN 292-1 Safety of machinery – Basic terminology, methodology
- EN 292-2 Safety of machinery – Technical principles and specifications
- EN 809 Pumps and pump units for liquids - common safety
requirements
and furthermore declare that it is not permitted to put the slurry pump into
service until the machinery into which it is to be incorporated has been found
and declared to be in conformity with the provisions of Directive 98/37/EG
and with relevant national legislation. This refers to the equipment as a whole,
including the machinery referred to in this declaration.
A pump delivered with motor has
a machine sign with ce-mark.
When the pump is delivered
without motor the ce-mark has to
be affixed when the motor is
assembled.
The ce-mark is included in the
pump delivery.
2004-06-07 in Sala, Sweden
Name: Jan Andersson
Position: General manager, Slurry pump division
Space for
ce-mark
Pump type
Pump number
Year of
manufacture

Metso MM200 EHC-D Specifications

General

Brand	Metso
Model	MM200 EHC-D
Category	Water Pump
Language	English