Slurry Pump
WH14AAAAAA0EN_04D.DOC JAN 04-W08
Health & safety
1/2
3 HEALTH AND SAFETY
3.1 General
HEALTH AND SAFETY STATEMENT
DO TAKE TIME TO ENSURE THAT YOUR SAFETY AND THAT OF OTHERS IS NOT PUT AT RISK. FAILURE
TO OBSERVE CERTAIN ELEMENTARY SAFETY PRECAUTIONS MAY RESULT IN PERSONAL INJURY OR
DAMAGE TO THIS PUMP EQUIPMENT. THE SAFETY INFORMATION IN THIS AND OTHER SECTIONS IS
INTENDED TO ENCOURAGE A SAFETY CONSCIOUS APPROACH TO OPERATING AND CARRYING OUT
MAINTENANCE.
3.1.1 Warnings and cautions
For the purpose of definition in this manual, a WARNING gives information which if ignored
could lead to serious injury of personnel. A CAUTION gives infomation which if ignored
could lead to serious damage to the pump or associated equipment.
WARNING
PARAGRAPHS WHICH PURELY PROVIDE A WARNING NOTICE ARE BOXED AND HIGHLIGHTED IN THIS
STYLE.
CAUTION
PARAGRAPHS WHICH PURELY PROVIDE A CAUTIONARY NOTICE ARE BOXED AND HIGHLIGHTED IN
THIS STYLE.
3.1.2 Training
It is strongly recommended that all customers' production and maintenance personnel and
site visitors are made fully aware of potential dangers of this equipment. If any doubt
exists, please contact Metso Minerals for advice.
FOR YOUR OWN PERSONAL SAFETY , READ AND TAKE NOTE OF THE FOLLOWING:
HAZARDOUS AREAS
- These are in the areas of the impeller, shaft seal,
impeller release mechanism, drive motor shaft,
direct drive coupling or drive belts. Under normal
operating conditions these areas MUST be enclosed
by safety covers or guards. Pump intake and
discharge ports, when open, are also hazardous
areas. NEVER insert your hand into either of these
ports without first ensuring that the pump drive has
been isolated.
To Next Page
Loading...
Need help?
General
