Slurry Pump
WH03AA1AAA0en_03b.doc JAN 04-W08
General
2/6
1.2.2 Handling and lifting
Whether at the depot or on site, ALWAYS follow normal handling and lifting procedures and
instructions contained or referred to in this manual.
Handling of centrifugal pumps requires great care, especially larger or more cumbersome
items of machinery. All slinging, lifting or conveying MUST be carried out by appropriately
skilled personnel.
Always lift slowly and smoothly, maintaining the pump in a level attitude.
For your covenience and safety, approximate weight of the pump, or pump complete with
drive unit and baseplate, is in the Appendices, Section 11.
WARNINGS
MAKE SURE THAT ALL SLINGS, SHACKLES, ETC. USED ARE OF ADEQUATE LOAD CARRYING CAPACITY
FOR THE UNIT TO BE LIFTED. CHECK THAT ALL LIFTING EQUIPMENT CERTIFICATES ARE CURRENT.
To Next Page
Loading...
Need help?
General
