Metso ND9200H User Manual

2
READ THESE INSTRUCTIONS FIRST!
These instructions provide information about the safe handling and operation of the intelligent valve controller.
If you require additional assistance, please contact the manufacturer or manufacturer's representative.
Addresses and phone numbers are printed on the back cover.
SAVE THESE INSTRUCTIONS!
Subject to change without notice.
All trademarks are property of their respective owners.
Table of Contents
1 ND9000 PRODUCT FAMILY SUMMARY ....... 3
1.1 Key features........................................... 3
2 ND9200H INTELLIGENT VALVE CONTROLLER
WITH HART COMMUNICATION..................... 4
2.1 General .................................................. 4
2.2 Technical description ............................. 4
2.3 Markings ................................................ 4
2.4 Technical specifications ......................... 5
2.5 Recycling and disposal .......................... 6
2.6 Safety precautions ................................. 6
3 MOUNTING...................................................... 6
3.1 General .................................................. 6
3.2 Mounting on EC and EJ actuators ......... 6
3.3 Mounting on Metso Automation actuators
with VDI/VDE mounting face.................. 7
3.4 Mounting on linear actuator of
nelesCV Globe....................................... 7
3.5 Mounting on linear actuator with IEC 60534
mounting face ........................................ 7
3.6 Piping ..................................................... 8
3.7 Electrical connections .......................... 11
4 LOCAL USER INTERFACE (LUI) ................. 12
4.1 Measurement monitoring ..................... 12
4.2 Guided start-up .................................... 12
4.3 Configuration menu.............................. 13
4.4 Mode menu .......................................... 13
4.5 Configuration parameters .................... 14
4.6 Valve travel calibration......................... 16
4.7 Special displays ................................... 16
4.8 HART write protection.......................... 17
5 MAINTENANCE............................................. 17
5.1 Prestage .............................................. 17
5.2 Spool valve .......................................... 18
5.3 Flame arrestor assembly ..................... 18
5.4 Diaphragms.......................................... 18
5.5 Communication circuit board ............... 18
5.6 Controller circuit board......................... 19
6 ERROR MESSAGES..................................... 19
6.1 Failsafe errors ...................................... 19
6.2 Alarms.................................................. 19
6.3 Errors ................................................... 20
6.4 Warnings.............................................. 20
6.5 Notifications ......................................... 20
7 TROUBLE SHOOTING.................................. 21
8 TOOLS........................................................... 21
9 ORDERING SPARE PARTS ......................... 21
10 DRAWINGS AND PARTS LISTS .................. 22
10.1 Exploded view and parts list, ND9200H.... 22
10.2 Mounting parts for EC05-14 actuators,
rising signal opens valve...................... 24
10.3 Mounting parts for EJ05-14 actuators.. 24
10.4 Mounting parts for B1C/B1J 6-20 actuators25
10.5 Mounting parts for B1C/B1J 25-50,
B1C 502 and B1J322 actuators ........... 25
10.6 Mounting parts for Quadra-Powr
®
actuators .............................................. 26
10.7 Mounting parts for linear actuators of
nelesCV Globe..................................... 27
10.8 Mounting parts for linear actuators ...... 28
11 DIMENSIONS ................................................ 29
12 TYPE CODING .............................................. 30

Metso ND9200H Specifications

General

Brand	Metso
Model	ND9200H
Category	Control Unit
Language	English