Meyra-Ortopedia VR2 - Key-lock Function; Activating Key-Lock; Deactivating Key-Lock

1
2
10
Key-lock function
In order to protect the wheelchair
from unauthorised use, it can be
locked with the key-lock function.
Switch on the Key-lock function
To switch on the key-lock function the
wheelchair is engaged.
1. Hold onto the ON/OFF-key (1) until
a signal tone is heard, only then re-
lease it again.
2. Move the joystick forward until a
signal tone is heard, only then re-
lease the joystick.
3. Move the joystick backward until a
signal tone is heard, only then re-
lease the joystick.
☞ The joystick returns to the centre
(zero position) and the operating
module automatically switches off
with a long signal tone.
☞ The key-lock function is then en-
gaged.
Switch off the Key-lock function
After switching the operating on a
running light appears in the display
for the max fi nal speed / driving pro-
fi le (2).
1. Activate the ON/OFF-key (1).
2. Move the joystick forward until a
signal tone is heard, only then re-
lease the joystick.
3. Move the joystick backward until a
signal tone is heard, only then re-
lease the joystick.
☞ The joystick returns into the centre
(zero position) and the key func-
tion is switched off after a long
signal tone.
☞ The wheelchair is ready for opera-
tion again.