Meyra-Ortopedia VR2 - PREPARING THE WHEELCHAIR FOR OPERATION; Recharging Batteries; Switching On the Operating Module

1
2
3
4
9
PREPARING THE WHEEL-
CHAIR FOR OPERATION
Recharging batteries
To charge the batteries fi rst switch off
the operating module. Then insert the
plug of the battery charger into the
charging socket (1) on the front of the
operating module.
☞ Also view < Operating manual of
the wheelchair >.
!
Attention:
Do not insert other objects into the
battery charging socket.
– Danger of short circuit!
Switching the operating module
on
Press the ON/OFF key to switch on the
operating module (2). The electronic
system now performs a system test.
The electronic system is ready when
the battery indicator (3) is perma-
nently lit.
☞ Note:
Do not move the joystick during
the duration of the test.
☞ If a running light appears in the
display for the maximum fi nal
speed (4), the key-lock function is
still activated.
☞ see chapter < key-lock function >.