27
Switch the operating module on
and wait until the battery gauge
shows operational readiness by
lighting up. Now move the joystick
slowly to the front until the brake
system audibly reacts click noise.
The wheelchair will might start to
travel. Now release the joystick.
The brake must audibly engage
within a few seconds. Carry out the
same check for the right, left and
reverse driving direction.
▲ Check all cabling and plugs for ex-
ternal damage and proper tight-
ness.
▲ Check the joystick and the lower
collar for damage and cracks.
Annual checks
▲ Have the electronic system checked
by your dealer as part of the annu-
al maintenance of the wheelchair.
Safety checks
The electronic system conducts con-
stants checks during operation. The
user should carry out regular checks
to supplement these electronic safe-
ty measures. Have the wheelchair
checked immediately by an author-
ised specialist dealer if one of these
checks shows irregularities.
Daily checks
▲ Check the operating module and
the electronic components con-
nected to it for external damage
and correct securing to the wheel-
chair.
▲ With the operating module
switched off, check the joystick for
external damage and check to see
if the joystick returns to the centre
position from all other positions.
Weekly checks
▲ Joystick function in combination
with the magnetic brake system:
Ensure that there is a free space of
at least 1 m around the wheelchair
before starting this check.
To Next Page