19
Hill Descent Control (HDC) On/
Malfunction Indicator
If this lamp illuminates, it indicates that the HDC system is in the standby state.
If this lamp flashes, it indicates that the vehicle is under the control of HDC.
The HDC system has detected a fault.
Auto Hold Status Indicator The auto hold system is operating to assist the driver.
Electronic Parking Brake (EPB)
Status Indicator
If this lamp illuminates, it indicates that the EPB is enabled.
If this lamp flashes, it indicates that the vehicle is parked on an excessive slope or the EPB
system has failed. Please securely park the vehicle on a safe road.
Electronic Parking Brake (EPB)
System Malfunction Warning
The EPB system has detected a fault.
Brake System Malfunction
Warning
The brake system has failed. Please stop the vehicle as soon as safety permits, and turn off the
START/STOP Switch.
ABS Malfunction Warning
The ABS has failed.
If an ABS failure occurs while driving, ABS operation will be suspended, but normal braking will
still be available.
System Fault Message Indicator
This indicator is used to inform the driver that the vehicle has a stored warning message. Please
view the fault message or important notes in the information centre. Refer to “Information
Centre” in this chapter.
Instruments and Controls
1
To Next Page
Loading...
